9.[ETC / Building Material]
Polyurethane Foam Spray

World Foam Cleaner
After work, clean the foam gun, nozzle and valve
and remove extra flexible foam flowed out
by using World Foam Cleaner.

- Polyurethane Foam Cleaner is used for
removing the residue of polyurethane foam
and cleaning the spray gun
- Cleansing should be done berfore the residue
of polyurethane foam is hardened.
- Otherwise, cleaning is not possible and
the residue reaming unremoved.
- For removing the resiude of polyurethane
foam or erasing unnecessarily spread part,
depress the valve of the redbuttoned cleaner.

Features

- Work performance with maximum 60% more
volume than existing foam.
- Maximum 65L of foaming in a can be possible at optimized
condition (20 C, RH 60%)
- Fire retardant product which complies with the
standard of DIN 4102 Fire class B2 (germany)
- Shelf life : 18 Month

♧ Manufacturing specifications

• Working temperature
: +5℃~ +30℃ (optimal temp. +20℃)


• Tack Free Time
: 10 ~ 15 minutes (Avg. temp 20°C, humidity 60%)

• Anchor Construction
40 - 60 Menit

• Max. 65L

World GUN 151
The nozzle is getting thinner as it runs to
the tip so you can fill even narrow corner.

How to use

- Shake foam can sufficiently and
install the can on the gun.

- Open the set-screw and pull the trigger.

- The foam output can be controlled by turning
the set-screw.

- After using, remove the can from the gun
and clean the gun several times until
internal remains are completely gone.