⑪ Volute Pump

♧ Use and applications
For clean fluids
(water, sea water, chemicals. oil, lyes, condensate, etc.)

For general purpose pumping in a wide range of services :
general industries, chemical industries, domestic water supply,
buildings, waterworks, water treatment, irrigation,
marine use (fresh water, cooling water, sanitary, G.S, Ballast...)
drainage, air conditioning, spray, swimming pool,
dust removing & sprinkler, cooling or heating circulation etc.


♧ Design and construction features
01. Good efficiency smooth operations, and trouble free operation
throughout a wide range of hydraulic coverage.

02. Maximum interchange abilities of pump parts.
03. Radially split volute casing.
04. Impeller back pull-out arrangement.
05. Flanges are KS or JIS, 10kg / cm² ratings. FF.
06. Dynamically balanced impeller.
07. Ball bearings series 5300, 6300, and/or 7300 etc.
Grease contained type or oil bath type lubrication.

08. Uncooled stuffing box. Packing rings or mechanical seal.
09. Clock-wise(CW) rotation when viewed form the drive end.
10. welded steel base plate, machined both up side and bottom side.
11. Precision shell-moulded casting for better hydraulics
and consistent casting integrity.

* The out of the above range can be supplied
according to customer’s order placement.


♧ Operating data
Capacity : 0.05m³/min ~ 35m³/min
Head : 3m ~ 92m
Suction Bore : Ø40mm ~ Ø4,000mm

♧ Usages and applications
For clean water, sea water, chemicals,
etc. Services such as sump, auxiliary water etc.
In the pulp and paper industry, power plants,
sewage treatment plants, chemical and petrochemical plants,
foodstuffs industries, steel industries, steel industry etc.


♧ Design and operation features
01. Vertical construction, reduced installation space
and suitable for automatic operation.

02. Shaft is protected by the shaft protection tube
with sealing oil seal and gasket.

03. Smooth and stable operation is guaranteed
by the bearings securely supported.

04. Special materials (stainless steel etc) available.
05. Gas-tight base plate available if requested.
06. All the pumps are clockwise rotation when viewed
from the driver end.

* The out of the above range can be supplied
according to customer’s order placement.


♧ Operating data
Capacity : 0.04m³/min ~ 5m³/min
Head : 6m ~ 45m
Suction bore : Ø40mm ~ Ø150mm

♧ Usages and applications
For clean fluids(water, sea water, oil etc)
For general purpose pumping in a wide range of services :
general industries, domestic water, buildings, water works,
water treatment, irrigation, marine use
(fresh water, cooling water, sanitary, G.S, ballast)


♧ Design and operation features
01. Good efficiency smooth operations and trouble free operation
throughout a wide range of hydraulic coverage.

02. Maximum interchange abilities of pump parts.
03. Flange are KS, JIS Suc. 5kg/cm²,
FF Dis. 5kg/cm², or 10kg/cm², FF

04. Dynamically balanced impeller
05. Clock-wise(CW) rotation when viewed form the driver end.
06. Impeller back pull-out arrangement
07. Available to install on a small space.
08. Easy to maintenance
09. Power transmission is preformed by a rigid coupling
10. Shaft sealing by M/Seal or Packing type.

* The out of the above range can be supplied
according to customer’s order placement.


♧ Operating data
Capacity : 1.2m³/min ~ 10m³/min
Head : 15m ~ 33m
Suction bore : Ø100mm ~ Ø250mm