⑨-3 Centrifugal Process Pump

♧ Application ranges
For light duty process services in the chemical
and petrochemical industries, refineries etc.

01. In refineries, petrochemical industry,
coal processing and low temperature engineering

02. In chemical industry, fiber and general processing industries,
particularly in paper and pulp industries, sugar industry.

03. In water industry, particularly seawater desalination plants.

04. In heating and air-conditioning

05. In fossile and nuclear power stations.

06. In environmental protection engineering.

07. In ship and offshore industries.


♧ Design
01. Horizontal, radially split volute casing pump
for process pattern according to API 610

02. Centerline mount type

03. Single-entry radial impeller

04. Cooling of baseplate pedestal possible

05. Flanges according to ANSI 300

06. Direction of rotation clockwise seen form the drive end

07. Depending on operating conditions hydraulic balance provided
by front or rear wear rings and balance holes

08. Casing cover with cooling or heating connections

09. Shaft sealing by packing or mechanical seal

* The out of the above range can be supplied
according to customer’s order placement.


♧ Operating data
01. Size : 25 up to 200
02. Capacities : up to 800m³/hr
03. Heeds : up to 250m
04. Operating pressures : up to 25bar
05. Operating temperatures : up to + 230°C

▣ For pulp and paper industries,
and process industries.

♧ Usages and applications
Paper stock thru 6% consistency,
black liquor to 60% solids etc. in the pulp & paper industries.
Slurry handing, corrosive/abrasive crude, coke fines,
waste treatment, venturi scriber, textile slurries etc,
in the process industries.


♧ Design and operation features
01. Materials in gray cast iron, ductile cast iron, stainless steel etc.
02. Vertically split casing
03. Modified spiral volute casing.
04. Back pull-out design for low maintenance and downtime.
05. Open impeller.
06. Adjustable side plate and impeller.
07. Renewable shaft sleeve.
08. Oil lubricated bearings.
09. Rotation : Clockwise rotation viewed from the driver end.
10. Flanges are KS(JIS) 10kg/cm² ratings, FF
11. Dynamic Balance Seal Type (Option).

* The out of the above range can be supplied
according to customer’s order placement.


♧ Operating data
Capacity : 0.5m³/min ~ 67m³/min
Head : 5m ~ 80m
Suction Bore : Ø100mm ~ Ø500mm

♧ Usages and applications
In chemical and petrochemical industries
In refinery industries

♧ Operating data
Capacity : 0.07m³/min ~ 4.5m³/min
Head : 3m ~ 90m
Suction bore : Ø40mm ~ Ø150mm

(Horizontal, Single Stage, Volute Casing ISO Process Pump)


♧ Design
Horizontal, radially split volute casing pump
in back pull out design, with radial impeller,
single-stage, conform to ISO 2858, ISO 5199.


♧ Application
01. Chemical industry
02. Petrochemical industry
03. Petroleum refining industry
04. The Paper and cellulose industries
05. The Foodstuffs industry
06. Other Various industry


♧ Operating Data
• Capacity : Up to 12m²/min
• Head : Up to 180m
• Discharge pressure : Up to 16kg f/cm²
• Allowable Suction Pressure : UP to 9kg f/cm²
• Rotation : Clockwise viewed from coupling side
• Hydraulic test pressure UP to 24kg f/cm²
• Temperature
- Stainless steel : -50°C ~ 175°C
- Cast Iron : -20°C ~ 150°C