⑭ Gear Pump

♧ Usages and applications

01. Application
Lubricating oil, Fuel oil or other liquids with property

02. Differential pressure
5~10kg/cm²

03. Bearings
Internally setted ball bearing or roller bearing,
lubricated by the pumping liquid.

04. Shaft sealing
Gland packing or mechanical seal.

05. Relief valve
Built-in type.
Setting pressure : minimum 5.5kg/cm² maximum 10.5kg/cm²

06. Pumping temperature
Up to 80°C (Normally up to 60°C)

07. Flanges
KS or JIS 10kg/ cm², FF

08. Number of revolutions
In general.

09. Viscosity
5~2000cst.

10. Standard capacity
Calculated at 25.8cst (Rw.No.1, 100sec.)
Motor rpm slip considered.

* The out of the above range can be supplied
according to customer’s order placement


♧ Operating data
Capacity : 40m³/Hr ~ 200m³/Hr
Head : 2Kg/㎠ ~ 10Kg/㎠
Suction Bore : Ø150mm ~ Ø250mm