8. Agitator & Pump

■ Non-clog pump for unscreened sewage and sludges.


♧ Usages and applications
For the applications and services such as unscreened
sewages, sludges, waste water, raw water, food-stuffs waste,
paper pulp, slurry, gas-entrained liquid, fibrous liquid,
fish, etc, transfer and feed in the waste treatment plant
and various branches of industry.


♧ Design and operation features
01.By combining design theories of volumetric screw pumps
and centrifugal pumps, improved the design of
conventional non-clog pumps.

02. Steep curve of performance enables easy control of capacity.
03. Power consumption is not so much sensitive to the
variation of flow.

04. Suitable for pumping of liquids with high viscosity
or containing solids.

05. Clearance between the impeller
and the suction cover is adjustable.

06. Impeller back pull-out design.
07. Counter Clock wise(CW) rotation
when viewed form the driver end.

08. Uncooled stuffing box. Packing rings or mechanical seal.
09. Roller bearing and ball bearing. Oil bath type lubrication.
10. Welded steel base plate, machined both up side and bottom side.
11. Flange : KS D 4308

* The out of the above range can be supplied
according to customer’s order placement.


♧ Operating data
Capacity : 0.05m³/min ~ 35m³/min
Head : 3m ~ 92m
Suction Bore : Ø80mm ~ Ø600mm

♧ Usages and applications

For clean fluids, general industries, chemical
industries, marine use, domestic or
town water supply, agricultural use house
builder’s utility, hospitals, fire fighting use, etc.


♧ Design and operation features

01. Flanges are KS or JIS 5kg/cm² rating, FF.

02. Good efficiency, smooth operation,
and trouble free operation throughout
a wide range of hydraulic coverage.

03. Maximum interchange abilities of pump parts.

04. Radially split volute casing.

05. Impeller back pull-out arrangement.

06. Dynamically balanced impeller.

07. Ball bearings series 5300. 6300. and/or 7300 etc.
Grease contained type or oil bath type lubrication.

08. Uncooled stuffing box. Packing rings or mechanical seal.

09. Colck-wise(CW) rotation when viewed from the drive end.

10. Welded steel base plate, machined both up side and bottom side.

11. Precision shell-moulded casings for better hydraulics
and consistent casting integrity.

12. Precision machining of parts.

13. Special materials or casings for special liquid pumping.

* The out of the above range can be supplied
according to customer’s order placement.


♧ Operating data

Capacity : 0.1m³/min ~ 210m³/min
Head : 55m ~ 104m
Suction bore : Ø65mm ~ Ø150mm

♧ Usages and applications
For pumping clean, cold, hot liquid.
01. in water plants.
02. in heating and boiler plants.
03. in booster plants of various industrial branches.
04. for condensate recovery.


♧ Operating data
01. Capacity : up to 400m³/hr
02. head : up to 250m
03. Operating pressure : up to 25kg/cm²
04. Operating Temperature : up to 140°C