① Flow Meter

(WISOP)

♧ System Description
Solar Power Flow Monitoring System
only use solar energy for opereation.

The system has 80W solar panel, and 5 rechargeable batteries,
and clamp-on ultrasonic flowmeter.

Total power consumption of the system is only 5W per hour,
so the system can operate 30 days without sun.

• Only Solar Power Required
• Beautiful Design
• Wireless CDMA Modem Communication
• No Cutting pipe
• No AC Power Required
• No Cooling Fan (unique design for air cooling)
• Patented Design
• Patented AR Mode, Clampon Ultrasonic Flowmeter
• Operate 30 days without sun
• System Consisted of 1 Ultrasonic Flowmeter
5 Rechargeable Batteries 1 CDMA Modem 1 Charge Controller


Application Solar Power Flow Monitoring System
can be used for municipal water monitoring system.

The system is very beautiful, so it make street beautiful
and shop owners do not complain about this solar power panel.

Old cabinet type flowmeter panel is big and ugly also.

• Block Monitoring System for Municipal Water Supply Pipes
• Irrigation Flow Monitoring System
• Waste Water Monitoring System
• Useful For Rural & Desert Area


♧ Specifications
• Power : Solar 80W Panel, 15V Power Consumption
• Communication : Wireless CDMA For Flow, Total, Pressure, etc
• Flowmeter : Clamp-on, Ultrasonic Transit-Time
• Panel Size : height 3.0M, 300Ø Stainless steel
• Date Inputs : Two (Pressure or Level)

(XonicⓇ 10LE)

Xonic10LE is
insertion ultrasonic flowmeters
with 1 path, 2 path, 3 paths spool type.

It has no moving parts and fully digitalized
with precise temperature sensors.

Xonic10LE can measure clean water,
dirty water, chemicals, oil, alcohol, etc,
so it can replace conventional flowmeters


♧ Specifications Measuring

• Method Ultrasonic Transit-Time
: 1~3 Pair Insertion Transducers

• Accuracy
: 0.5% RD

• Measuring Range
: 0.05~10 m/s (Flow velocity)
: -40 ~ +150 ℃ (Temperature)

• Sensitivity
: 0.001 m/s

• Temperature Sensor
: PT500

• Output
: RS-232C/485, 4-20mA, Relay

• Display
: Flow & Total
: BTU Flow & Total
: Graphic Mode (diagnostic) - Signal shape, Strength, etc

• Operating Temperature
: -20 ~ +60℃ for Electronics
: -40 ~ +120℃ for Transducers
: -100 ~ +150℃ for Temperature

• Datalogger
: 32Mbytes

• Protection IP68 for Spool IP65 for Electronics Spool Material
: Stainless Steel 304

(XonicⓇ 100LO)

♧ System Description
It is a new sewage flowmeter that
completely overcomes undetectable lowlevel flow rate
and error, which is a chronic problem of
conventional doppler sewer pipe,
and first developed in the world.

Xonic 100LO measure flow velocity directly
with patented 4 path transit-time ultrasonic transducers.


♧ Application
Xonic 100LO is specially designed for sewage pipe only.

It use 4 path transducers to measure flow rate
and use level meter to receive level data.
Also it can measure partly filled pipes.


♧ Flow unit specialized for sewage
Sewage flow rate is usually low,
thus it is difficult to measure it with conventional doppler.

However Xonic 100LO with specially designed flow unit
can measure normal flow as well as very low flow at midnight.

Also it alerts when sand have precipitated
and indicates necessity of maintenance or cleaning.