Scale remover (Powder)
SCAN 303

SCAN 303 has been designed to remove fast
light to medium scale deposits which lead
to energy consumption without damaging iron,
copper, aluminium and wood etc. And due
to its unique properties, SCAN 303 is broadly
well-suited for providing cleaning solution
to the problem of adequately maintaining
water-based cooling condensers, cooling towers,
boilers, thermal-conductivity of hydrothermal or
cooling equipment, surface regeneration,
mold-casting and similar equipment for efficient operation.

Typical properties

- Formulation: organic-acidic corrosion
inhibitor and dispersion agent of scale deposit
- Appearance : white powder
- Std. cleaning concentration : required 10% of water content of reservoir
- Std. cleaning time : in 3 hr - 5 hr
- Std. cleaning temperature : 60 ℃
- pH (1% solution) : 1.3

Characteristics

- Offers easy work with low toxic and doesn't
produce a harmful gases like hydrochloric acid gas.
- Can be done in a short cleaning time by
dispersing the scale and deposits.
- Provides good chemical stability for the
basic material with strong corrosion inhibitors.
- Can be also processed at ambient temperature
and provides good workability due to minimum
suspension of the operation.


How to use

- Input by 10% density about the retained water amount.
- When do not operate device, do to do
circulation driving during 3 - 5 hours.
- Clean cleanly in Fresh water after discharge.


Handling & Storing

- Put mask and rubber gloves and avoid
contact with human body formation.
- In case came into skin or eye mouth,
wash enough in flowing water.
- Shut tightly and keep except when use.


Package unit
- 25kg CAN