8. Agitator & Pump

♧ Type of AGITATOR

• HLA 300 SERIES
• HFA - SERIES (FLANGE AGITATOR)
• HSA - SERIES (FLANGE AGITATOR / MIDSIZE)
• HVA - SERIES (V-BELT AGITATOR)
• HDA - SERIES (DIRECT AGITATOR)
• HLA - SERIES (GLAND PACKING AGITATOR)
• HLA - SERIES (MECHANICAL AGITATOR)
• HCR - SERIES (QUIESCENT TANK)
• LARGE AGITATOR
• P - SERIES

♧ Application ranges
For light duty process services in the chemical
and petrochemical industries, refineries etc.

01. In refineries, petrochemical industry,
coal processing and low temperature engineering

02. In chemical industry, fiber and general processing industries,
particularly in paper and pulp industries, sugar industry.

03. In water industry, particularly seawater desalination plants.

04. In heating and air-conditioning

05. In fossile and nuclear power stations.

06. In environmental protection engineering.

07. In ship and offshore industries.


♧ Design
01. Horizontal, radially split volute casing pump
for process pattern according to API 610

02. Centerline mount type

03. Single-entry radial impeller

04. Cooling of baseplate pedestal possible

05. Flanges according to ANSI 300

06. Direction of rotation clockwise seen form the drive end

07. Depending on operating conditions hydraulic balance provided
by front or rear wear rings and balance holes

08. Casing cover with cooling or heating connections

09. Shaft sealing by packing or mechanical seal

* The out of the above range can be supplied
according to customer’s order placement.


♧ Operating data
01. Size : 25 up to 200
02. Capacities : up to 800m³/hr
03. Heeds : up to 250m
04. Operating pressures : up to 25bar
05. Operating temperatures : up to + 230°C

♧ Usages and applications
For the same application that of EVP series,
primarily for sump drainage in various branches of industry,
such as polluted waste treatment, various waste water
including chemical waste, pulp transfer, and transfer of
liquid containing slurry, sludge, solid material etc.


♧ Design and operation features
01. Vertical construction, reduced installation space
and suitable for automatic operation.

02. Shaft is protected by the shaft protection tube
with sealing oil seal and gasket.

03. Smooth and stable operation is guaranteed
by the bearings securely supported.

04. Special materials(stainless steel etc) available.
05. Gas-tight base plate available if requested.
06. All the pumps are clockwise rotation
when viewed form the driver end.

07. Non-clog vortex pump through which solids passes
without clogging.

* The out of the above range can be supplied
according to customer’s order placement.


♧ Operating data
Capacity : 0.04m³/min ~ 5m³/min
Head : 6m ~ 45m
Suction bore : Ø40mm ~ Ø150mm

♧ Application ranges
For pumping clean, cold or hot liquids
01. In water plants
02. In heating and boiler plants
03. In booster plants of various industrial branches
04. For condensate recovery


♧ Operating data
01. Capacity : up to 150m³/hr
02. head : up to 750m
03. Operating pressure : up to 80bar
04. Operating Temperature : up to -20°C up to +180°C

♧ Usages and applications

For clean fluids, general industries, chemical
industries, marine use, domestic or
town water supply, agricultural use house
builder’s utility, hospitals, fire fighting use, etc.


♧ Design and operation features

01. Flanges are KS or JIS 5kg/cm² rating, FF.

02. Good efficiency, smooth operation,
and trouble free operation throughout
a wide range of hydraulic coverage.

03. Maximum interchange abilities of pump parts.

04. Radially split volute casing.

05. Impeller back pull-out arrangement.

06. Dynamically balanced impeller.

07. Ball bearings series 5300. 6300. and/or 7300 etc.
Grease contained type or oil bath type lubrication.

08. Uncooled stuffing box. Packing rings or mechanical seal.

09. Colck-wise(CW) rotation when viewed from the drive end.

10. Welded steel base plate, machined both up side and bottom side.

11. Precision shell-moulded casings for better hydraulics
and consistent casting integrity.

12. Precision machining of parts.

13. Special materials or casings for special liquid pumping.

* The out of the above range can be supplied
according to customer’s order placement.


♧ Operating data

Capacity : 0.1m³/min ~ 210m³/min
Head : 55m ~ 104m
Suction bore : Ø65mm ~ Ø150mm

♧ Use and applications
For clean fluids
(water, sea water, chemicals. oil, lyes, condensate, etc.)

For general purpose pumping in a wide range of services :
general industries, chemical industries, domestic water supply,
buildings, waterworks, water treatment, irrigation,
marine use (fresh water, cooling water, sanitary, G.S, Ballast...)
drainage, air conditioning, spray, swimming pool,
dust removing & sprinkler, cooling or heating circulation etc.


♧ Design and construction features
01. Good efficiency smooth operations, and trouble free operation
throughout a wide range of hydraulic coverage.

02. Maximum interchange abilities of pump parts.
03. Radially split volute casing.
04. Impeller back pull-out arrangement.
05. Flanges are KS or JIS, 10kg / cm² ratings. FF.
06. Dynamically balanced impeller.
07. Ball bearings series 5300, 6300, and/or 7300 etc.
Grease contained type or oil bath type lubrication.

08. Uncooled stuffing box. Packing rings or mechanical seal.
09. Clock-wise(CW) rotation when viewed form the drive end.
10. welded steel base plate, machined both up side and bottom side.
11. Precision shell-moulded casting for better hydraulics
and consistent casting integrity.

* The out of the above range can be supplied
according to customer’s order placement.


♧ Operating data
Capacity : 0.05m³/min ~ 35m³/min
Head : 3m ~ 92m
Suction Bore : Ø40mm ~ Ø4,000mm

■ Non-clog pump for unscreened sewage and sludges.


♧ Usages and applications
For the applications and services such as unscreened
sewages, sludges, waste water, raw water, food-stuffs waste,
paper pulp, slurry, gas-entrained liquid, fibrous liquid,
fish, etc, transfer and feed in the waste treatment plant
and various branches of industry.


♧ Design and operation features
01.By combining design theories of volumetric screw pumps
and centrifugal pumps, improved the design of
conventional non-clog pumps.

02. Steep curve of performance enables easy control of capacity.
03. Power consumption is not so much sensitive to the
variation of flow.

04. Suitable for pumping of liquids with high viscosity
or containing solids.

05. Clearance between the impeller
and the suction cover is adjustable.

06. Impeller back pull-out design.
07. Counter Clock wise(CW) rotation
when viewed form the driver end.

08. Uncooled stuffing box. Packing rings or mechanical seal.
09. Roller bearing and ball bearing. Oil bath type lubrication.
10. Welded steel base plate, machined both up side and bottom side.
11. Flange : KS D 4308

* The out of the above range can be supplied
according to customer’s order placement.


♧ Operating data
Capacity : 0.05m³/min ~ 35m³/min
Head : 3m ~ 92m
Suction Bore : Ø80mm ~ Ø600mm

♧ Usages and applications
Boiler feed water pump

♧ Operating data
Capacity : 1m³/Hr ~ 28m³/Hr
Head : 80m ~ 160m
Suction Bore : Ø50mm

♧ Usages and applications
In general industries : water intake and supply
In thermal power plants : cooling water, water circulation
In nuclear power plants : cooling water, water circulation


♧ Design and Construction features
01. The pumps shall be pullout type designed to removed
all internals without desturbing the discharge column
or other major componemts.
02. Rotation : C.W when viewed from driver
03. Installation place : Indoor and Outdoor
04. Impeller : Open or Semi open type having blade of 3 Dimension


♧ Operating data
01. Total Head : 10~50m
02. Discharge flow : 50~1200m³/min
03. Temperature : 0~40°C
04. Bore : 500mm~3000mm

* The out of the above range can be supplied
according to customer’s order placement

up to 105℃ ~ 18kg/㎠ working pressure
[10~16 Bar / PN 10~16 Bar]


♧ Usages and applications
For clean water, sea water, crude oil, pulp water,
intermediate refinery products etc.

Services such as ballast, circulation, general service,
auxiliary water, drainage, supply etc.

In the water supply plants, refinery, pulp and paper industry,
irrigation, pipeline stations, tank installations, power plants etc.


♧ Design and operation features
01. Good efficiency, smooth operation, and trouble free operation
through a wide range of hydraulic coverage.

02. Flanges are KS or JIS 10kg/cm² ratings. FF

03. Dynamically and hydraulically balanced impeller.

04. Possible to fit with fan type impeller(option)

05. Generously size ball bearing are used.
Grease lubrication. (Standard) oil lubrication(option)

06. Bearing housings are flange mounted and doweled to the casing
to the casing to provide accurate realignment.

07. Short bearing span minimizes deflection

08. Uncooled stuffing box. Packing ring. Possible also mechanical seal.

09. Clock-wise(CW) rotation when viewed from the driver end.

10. Welded steel base plate. machined both up side and bottom side.


* The out of the above range can be supplied
according to customer’s order placement.


♧ Operating data
Capacity : 3m³/min ~ 450m³/min
Head : 8m ~ 190m
Suction bore : Ø200mm ~ Ø1,650mm

♧ Usages and applications

01. Application
Heavy oil, Clean liquid, Molasses etc.

02. Differential pressure
Up to 10kg/cm²

03. Bearing
Roller bearing, lubricated by grease.

04. Shaft sealing
oil seal or mechanical seal. Shaft sleeve available.

05. Relief valve
Built-in type.

06. Flanges
Suction and delivery KS or JIS 10kg/cm² rating(FF)


♧ Operating data
Capacity : 60m³/Hr ~ 200m³/Hr
Head : 2Kg/㎠ ~ 10Kg/㎠
Suction Bore : Ø100mm ~ Ø175mm

(Vertical Mixed flow Can-Type Pump)

♧ Usages and applications
In general industries : boiler feed water
In power plants : condensate water


♧ Design and Construction features
01. Impeller : Close type having blade of 3Dimension
02. Rotation : C.W when viewed from driver
03. Installation place : Indoor and Outdoor


♧ Operating data
01. Total Head : 20~200m
02. Discharge flow : 100~1200m³/min
03. Temperature : 0~160°C
04. Bore : 200mm~400mm

* The out of the above range can be supplied
according to customer’s order placement

♧ Usages and applications
For pumping clean, cold, hot liquid.
01. in water plants.
02. in heating and boiler plants.
03. in booster plants of various industrial branches.
04. for condensate recovery.


♧ Operating data
01. Capacity : up to 400m³/hr
02. head : up to 250m
03. Operating pressure : up to 25kg/cm²
04. Operating Temperature : up to 140°C

♧ Usages and applications

01. Application
Lubrication oil, Fuel oil or other liquids with lubrication property.

02. Differential pressure
Up to 7kg/cm²

03. Bearing
Internally setted metal bearing, lubricated by the pumping liquid.

04. Shaft sealing
Gland packing or mechanical seal.

05. Relief valve
Built-in type, Setting pressure
: minimum 2.2kg/cm² maximum 7.2kg/cm²

06. Pumping temperature
Up to 70°C

07. Flanges
KS or JIS 10kg/cm², rating. FF.

08. Standard capacity
Calculated at 25.8cst. (Rw.No.1, 100sec.)
Rpm-slip of motor considered

* The out of the above range can be supplied
according to customer’s order placement


♧ Operating data
Capacity : 40m³/Hr ~ 200m³/Hr
Head : 3Kg/㎠ ~ 7Kg/㎠
Suction Bore : Ø150mm ~ Ø250mm

♧ Usages and applications
For polluted waste treatment
Pulp transfer
Slurry and sludge
Solid material, etc.


♧ Design and construction features
01. The vortex pump is available in all configurations
: suspended and cantilever design
: horizontal and vertical dry pit : and wet pit

02. Heavy duty bearing housing and rotating elements
with casing cover are easily accessible due to its
back pull-out design which permits pump-maintenance
without disturbing suction or discharge piping

03. choice of packing or mechanical seal to suit fluid being handled.

04. The vortex pumps are manufactured in a wide range of materials,
such as cast iron, cast steel, stainless steel,
or bronze for variety of operating conditions.

05. There is an absolutely unobstructed passage throughout
the pump casing and the material flow in front of the impeller,
not through it, true nonclogging characteristics can be provided
and large, fibrous and stringy solids, slurries suspending in liquids,
and sewage etc. are easily handled without clogging.
Solid size is limited only by suction and discharge nozzle diameter.

06. Back vanes reduce axial thrust and stuffing box pressure resulting
in extended seal, packing, sleeve and bearing life.

07. Since pumping action is by induced vortex rather than
by impeller vanes, the vortex pump is superior for handling
aerated pulps sludges gas or air entrained liquids etc, with Low NPSH.
And it is reliable even with abrasive media because of its
hydraulic principles.

08. Because of the slow build up pressure in the casing,
particularly gently handing of the liquid
and minimum damage to crystal are guaranteed.
Fragile materials or particles can,
also, be handled with minimum is achieved.

09. Due to continuously changing speed of rotation of the vortex
in the casing, very through mixing is achieved.

* The out of the above range can be supplied
according to customer’s order placement.


♧ Operating data
Capacity : 0.05m³/min ~ 5m³/min
Head : 5m ~ 44m
Suction bore : Ø40mm ~ Ø150mm

♧ Usages and applications
01. For water intake, supply and drainage
02. In thermal power plants : cooling water
03. In iron works : water circulation, drainage, scale pit
04. In sewage system : water inflow and outflow
05. In agriculture : water pumping and supply
06. In water works : water intake and supply
07. Others : drainage of dock, drainage of river


♧ Design and Construction features
01. Installation : It has a various installation method to meet
customer’s requirement
02. Rotation : C.W when viewed from driver
03. Flange Rating : KS 10kg/cm², FF
04. Installation place : Indoor and Outdoor
05. Sleeve bearing : Rubber(water lubrication),
Bronze(grease lubrication)
06. Thrust bearing : Ball or Roller bearing(oil lubrication)
07. Impeller : Open or semi open type having blade of 3Dimension


♧ Operating data
01. Total Head : 4~15m
02. Discharge flow : 10~1200m³/min
03. Temperature : 0~40°C
04. Bore : 350mm~3000mm

♧ Use and applications
01. Sewage treatment, Chemical, Ceramic, Construction,
and Hining industry

02. Food, Beverage, Sugar and Starch industry,
Pharmaceutical industry.


♧ Principle
Eccentric Screw pump consists of a single helix metal rotor
which rotates eccentrically within an elastomeric stator
with a double helix form. The interference fit between the rotor
and stator creates a constant cavity which carries the pumped product
continuously through the pump.


♧ Design and operation features
01. Eccentric Screw Pump conveys easily high viscous
and high dense material.
02. Uniform, Non-pulsating flow.
03. High suction capability.
04. Vulcanized-in, Easily replaceable stator,
Torsion-proof, therefore a Long service life.


♧ Operating data
Capacity : 1m³/Hr ~ 75m³/Hr
Head : 1Kg/㎠ ~ 5Kg/㎠
Suction Bore : Ø40mm ~ Ø125mm

♧ Application ranges
For pumping clean, cold or hot liquids
01. In water plants
02. In heating and boiler plants
03. In booster plants of various industrial branches
04. For condensate recovery


♧ Operating data
01. Capacity : up to 150m³/hr
02. Head : up to 450m
03. Operating pressure : up to 40bar
04. Operating Temperature : up to -20°C up to +180°C
05. Flange Rating : Suction side KS 10K Discharge side KS 40K

♧ Usages and applications

01. Application
Lubricating oil, Fuel oil or other liquids with property

02. Differential pressure
5~10kg/cm²

03. Bearings
Internally setted ball bearing or roller bearing,
lubricated by the pumping liquid.

04. Shaft sealing
Gland packing or mechanical seal.

05. Relief valve
Built-in type.
Setting pressure : minimum 5.5kg/cm² maximum 10.5kg/cm²

06. Pumping temperature
Up to 80°C (Normally up to 60°C)

07. Flanges
KS or JIS 10kg/ cm², FF

08. Number of revolutions
In general.

09. Viscosity
5~2000cst.

10. Standard capacity
Calculated at 25.8cst (Rw.No.1, 100sec.)
Motor rpm slip considered.

* The out of the above range can be supplied
according to customer’s order placement


♧ Operating data
Capacity : 40m³/Hr ~ 200m³/Hr
Head : 2Kg/㎠ ~ 10Kg/㎠
Suction Bore : Ø150mm ~ Ø250mm

(Horizontal, Single Stage, Volute Casing ISO Process Pump)


♧ Design
Horizontal, radially split volute casing pump
in back pull out design, with radial impeller,
single-stage, conform to ISO 2858, ISO 5199.


♧ Application
01. Chemical industry
02. Petrochemical industry
03. Petroleum refining industry
04. The Paper and cellulose industries
05. The Foodstuffs industry
06. Other Various industry


♧ Operating Data
• Capacity : Up to 12m²/min
• Head : Up to 180m
• Discharge pressure : Up to 16kg f/cm²
• Allowable Suction Pressure : UP to 9kg f/cm²
• Rotation : Clockwise viewed from coupling side
• Hydraulic test pressure UP to 24kg f/cm²
• Temperature
- Stainless steel : -50°C ~ 175°C
- Cast Iron : -20°C ~ 150°C

♧ Usages and applications
For water intake, supply and drainage
In thermal plants: cooling water
In iron works: water circulation, drainage, scale pit
In sewage system: water inflow and outflow
In agriculture: water pumping and supply
In water works: water intake and supply
Others: drainage of dock, drainage of river


♧ Design and Construction features
01. Impeller : Close type having a blade of 3Dimension
02. Outside Bearing
: Composite with Radial Bearing and Thrust Bearing (Oil Lubrication)
03. Sliding bearing : Metal Bearing by Grease Lubrication
04. Rotation : C.W when viewed from driver
05. Flange Rating : KS 5kg/cm² RF
06. Sealing : Gland packing type


♧ Operating data
01. Total Head : 10m
02. Discharge flow : 25~400m³/min
03. Temperature : 0~40°C
04. Bore : 500mm~1700mm

* The out of the above range can be supplied
according to customer’s order placement

♧ Usages and applications
Lubrication oil, fuel oil, liquids with lubricating property


♧ Design and operation features
01. Applications
Lubrication oil, fuel oil, liquids with lubricating property

02. Differential pressure
Up to 6kg/cm².

03. Bearings
Internally setted metal bearing, lubricated by the pumping liquid.

04. Relief valve
Built-in type. Recommended Setting pressure is
132% of total pressure.
Setting pressure : minimum 2.2kg/cm² maximum 6.2kg/cm²

05. Shaft sealing
Gland packing or mechanical seal.

06. Pumping temperature
Up to 70°C in general(max.130°C)

07. Flanges
Suction and delivery KS or JIS 10kg/cm² rating.
Flange faces are flat faced.(FF)

08. Number of revolutions
Less than 400cst up to 1800rpm
Less than 500cst up to 1500rpm
Less than 1000cst up to 1200rpm~1000rpm

09. Viscosity
5~3000cst.

10. Standard capacity
calculated at 25.8cst(Rw.No.1, 100sec.),
Rpm-slip of motor is considered.
To keep the capacity at iscosity less than 25.8cst,
select bigger size or increase rpm.

* The out of the above range can be supplied
according to customer’s order placement


♧ Operating data
Capacity : 1m³/Hr ~ 30m³/Hr
Head : 2Kg/㎠ ~ 6Kg/㎠
Suction Bore : Ø32mm ~ Ø80mm

♧ Usages and applications
In chemical and petrochemical industries
In refinery industries

♧ Operating data
Capacity : 0.07m³/min ~ 4.5m³/min
Head : 3m ~ 90m
Suction bore : Ø40mm ~ Ø150mm

♧ Usages and applications
In agriculture : water pumping and supply
In sewage system : water inflow and outflow
In general industries : water intake and supply


♧ Design and Construction features
01. Impeller : Propeller type
02. Outside Bearing :
Composite with Radial Bearing and Thrust Bearing
03. Sliding Bearing : Metal bearing by grease lubricating
04. Sealing Type : Gland packing type
05. Rotation : C.W when viewed from driver
06. Flange Rating : KS 5kg/cm² RF


♧ Operating data
01. Total Head : 2~6m
02. Discharge flow : 20~400m³/min
03. Temperature : 0~40°C
04. Bore : 350mm~1700mm

* The out of the above range can be supplied
according to customer’s order placement

♧ Usages and applications
For clean fluids(water, sea water, oil etc)
For general purpose pumping in a wide range of services :
general industries, domestic water, building, water works,
water treatment, irrigation, marine use
(fresh water, cooling water, sanitary, G.S, ballast)


♧ Design and operation features
01. Good efficiency smooth operations and trouble free operation
throughout a wide range of hydraulic coverage

02. Maximum interchange abilities of pump parts.
03. Flange are KS, JIS Suc. 5kg/cm²,
FF Dis. 5kg/cm², or 10kg/cm², FF

04. Dynamically balanced impeller
05. Clock-wise(CW) rotation when viewed from the driver end.
06. Impeller back pull-out arrangement
07. Available to install on a small space.
08. Easy to maintenance.
09. Power transmission is performed by a rigid coupling.
10. Shaft Sealing by M/Seal type or Packing type.

* The out of the above range can be supplied
according to customer’s order placement.


♧ Operating data
Capacity : 12m³/min ~ 70m³/min
Head : 20m ~ 32m
Suction bore : Ø300mm ~ Ø600mm

▣ For pulp and paper industries,
and process industries.

♧ Usages and applications
Paper stock thru 6% consistency,
black liquor to 60% solids etc. in the pulp & paper industries.
Slurry handing, corrosive/abrasive crude, coke fines,
waste treatment, venturi scriber, textile slurries etc,
in the process industries.


♧ Design and operation features
01. Materials in gray cast iron, ductile cast iron, stainless steel etc.
02. Vertically split casing
03. Modified spiral volute casing.
04. Back pull-out design for low maintenance and downtime.
05. Open impeller.
06. Adjustable side plate and impeller.
07. Renewable shaft sleeve.
08. Oil lubricated bearings.
09. Rotation : Clockwise rotation viewed from the driver end.
10. Flanges are KS(JIS) 10kg/cm² ratings, FF
11. Dynamic Balance Seal Type (Option).

* The out of the above range can be supplied
according to customer’s order placement.


♧ Operating data
Capacity : 0.5m³/min ~ 67m³/min
Head : 5m ~ 80m
Suction Bore : Ø100mm ~ Ø500mm

♧ Usages and applications
For clean fluids(water, sea water, oil etc)
For general purpose pumping in a wide range of services :
general industries, domestic water, buildings, water works,
water treatment, irrigation, marine use
(fresh water, cooling water, sanitary, G.S, ballast)


♧ Design and operation features
01. Good efficiency smooth operations and trouble free operation
throughout a wide range of hydraulic coverage.

02. Maximum interchange abilities of pump parts.
03. Flange are KS, JIS Suc. 5kg/cm²,
FF Dis. 5kg/cm², or 10kg/cm², FF

04. Dynamically balanced impeller
05. Clock-wise(CW) rotation when viewed form the driver end.
06. Impeller back pull-out arrangement
07. Available to install on a small space.
08. Easy to maintenance
09. Power transmission is preformed by a rigid coupling
10. Shaft sealing by M/Seal or Packing type.

* The out of the above range can be supplied
according to customer’s order placement.


♧ Operating data
Capacity : 12m³/min ~ 70m³/min
Head : 20m ~ 32m
Suction bore : Ø300mm ~ Ø600mm

♧ Usages and applications
Lubrication oil, fuel oil, liquid with lubricating property


♧ Design and operation features
01. Applications
Lubrication oil, fuel oil, liquids with lubricating property

02. Differential pressure
Up to 16kg/cm².

03. Bearings
Internally setted metal bearing, lubricated by the pumping liquid.

04. Relief valve
Built-in type. Recommended Setting pressure is
132% of total pressure.
Setting pressure : minimum 8.5kg/cm² maximum 16.5kg/cm²

05. Shaft sealing
Gland packing or mechanical seal.

06. Pumping temperature
Up to 70°C in general (max.130°C)

07. Flanges
KS or JIS 10kg/cm²,(suc)
KS or JIS 16kg/cm²,(Dis)
Flange faces are flat faced(FF)

08. Number of revolutions
Less than 400cst up to 1800rpm
Less than 500cst up to 1500rpm
Less than 1000cst up to 1200rpm~1000rpm

09. Viscosity
5~2000cst.

10. Standard capacity
calculated at 25.8cst(Rw.No.1, 100sec.),
Rpm-slip of motor is considered.
To keep the capacity at iscosity less than 25.8cst,
select bigger size or increase rpm.

* The out of the above range can be supplied
according to customer’s order placement


♧ Operating data
Capacity : 2m³/Hr ~ 20m³/Hr
Head : 8Kg/㎠ ~ 16Kg/㎠
Suction Bore : Ø40mm ~ Ø100mm

♧ Usages and applications
For clean fluids(water, sea water, oil etc)
For general purpose pumping in a wide range of services :
general industries, domestic water, buildings, water works,
water treatment, irrigation, marine use
(fresh water, cooling water, sanitary, G.S, ballast)


♧ Design and operation features
01. Good efficiency smooth operations and trouble free operation
throughout a wide range of hydraulic coverage.

02. Maximum interchange abilities of pump parts.
03. Flange are KS, JIS Suc. 5kg/cm²,
FF Dis. 5kg/cm², or 10kg/cm², FF

04. Dynamically balanced impeller
05. Clock-wise(CW) rotation when viewed form the driver end.
06. Impeller back pull-out arrangement
07. Available to install on a small space.
08. Easy to maintenance
09. Power transmission is preformed by a rigid coupling
10. Shaft sealing by M/Seal or Packing type.

* The out of the above range can be supplied
according to customer’s order placement.


♧ Operating data
Capacity : 1.2m³/min ~ 10m³/min
Head : 15m ~ 33m
Suction bore : Ø100mm ~ Ø250mm

♧ Usages and applications
For clean water, sea water, chemicals,
etc. Services such as sump, auxiliary water etc.
In the pulp and paper industry, power plants,
sewage treatment plants, chemical and petrochemical plants,
foodstuffs industries, steel industries, steel industry etc.


♧ Design and operation features
01. Vertical construction, reduced installation space
and suitable for automatic operation.

02. Shaft is protected by the shaft protection tube
with sealing oil seal and gasket.

03. Smooth and stable operation is guaranteed
by the bearings securely supported.

04. Special materials (stainless steel etc) available.
05. Gas-tight base plate available if requested.
06. All the pumps are clockwise rotation when viewed
from the driver end.

* The out of the above range can be supplied
according to customer’s order placement.


♧ Operating data
Capacity : 0.04m³/min ~ 5m³/min
Head : 6m ~ 45m
Suction bore : Ø40mm ~ Ø150mm