1. Environment Equipment / Material

♧ SCOPE AND PLACE OF UTILIZATION

The high efficiency fluidized contracting medium is medium for purification treatment that aerobic bacteria remove polluted substances by resolving and anaerobic bacteria remove nitrogen and phosphor simultaneously, that used extensively in septic tank for combined excrement and sewage, organic waste water, and the like

1) Sewage treatment plant
2) Foul water treatment plant
3) Sanitation treatment plant
4) Sepric tank combined sewages
5) Lives waste water treatment plant
6) Foul water terminal treatment plant

H2 PLUS is
a system that generates water containing hydrogen molecule richly
by patented eco-friendly electrolysis technology

• Marvelous Sterilizing Power 99.99%
escherichia coil, staphylococcus aureus, salmonella typhimurium,
pseudomonas aeruginosa, staphylococcus aureus (MRSA),
L.pneumophila, V.parahaemolyticus, etc.

• Removes Pesticide Residue 99.99%
diazinon ,fenitrothione, parathion.

• World’s First Application of Far IR radiation over 90%,
Water purification, Cold resistance, Moisture resistance,
Chemical resistance.

• Harmless to Human Beings
Turns tap water into disinfection water with no chemicals added.

[M SERIES]
- Flow rate(l/hr): 500, 1000
- Dimension: L750xD650xH1400mm
- Voltage: DC 15V 25A X 2

[S SERIES]
• S-200(Submerged type)
- Flow rate(l/hr): 200
- Dimension: L165xD125xH150mm
- Voltage: DC 12V 7.5A

• S-500(Direct type)
- Flow rate(l/hr): 500~1000
- Dimension: L470xD165xH510mm
- Voltage : DC 12V 7.5A X 2

Application Range
• Medical Treatment
• Agriculture/Horticulture
• Livestock Industry/Slaughterhouse
• Food Industry
• Laundry
• Semiconductor Cleaning Process
• Dish Washing

♧ Product features
Operation range is wide even in 1.5 bar pressure
and durability is excellent and large size manufacturing is available
and assembling is easy

• casing : made of cast iron, structured upper side inlet
two lower side outlet lower noise and high effeciency.
inlet/outlet bore follows KS K. FF flange standart

• rotor : made of cast iron and designed with high efficient 3 lobe spur
and helical impeller for corrosion and heat resistant and durability

• side cover : protect bearing and structured compressive air
not to be transmited but to be discharged

• shaft : made of SCM 415
and structured shrinkage fitting to impeller

• timing gear : made of SCM 415
and reducedfriction noise with class1 spur or helical gear


♧ Feature on design and structure
1. "T" direction of air flow
2. Design for high pressure
3. Class 1 gear
4. Ball or roller bearing
5. Lip type oil seal
6. 3 lobes spur or helical impeller
7. Durability
8. High volume efficiency

♧ Features
• Usage is calculated exactly as used rather than depending
on the operator's ability. it leads to reduction in energy and personel.
• regulator to prevent surging drastically allows for operation
in large territory as there in no limit in pressure and air volume.


♧ Application
water treatment aeration, fish farm aeration, pipe cleaning, drying,
spray for painting, powdered material, and conveying.


♧ Necessity of Turbo Blower
C Energy saving through adoption of high efficiency product
• Achieve the target of energy saving
• Reduce the greenhouse gas (Korea: Target is to reduce 30% by 2020)
• Recollect the initial investment within short period of time
(within 2~3 years)


♧ Improve the environmental friendly work circumstances
• Reduce Noise (Less than 85dB: Based on industrial safety)
• No Vibration
• Never lose oil (Oilless)

♧ Feature
• Highest possible fine bubble SOTE.
• Durable, impact-resistant.
• Non-clog, trouble-free efficient operation.
• Designed for resistance of compressed air heat in continuous operation.
• Easily adaptable to various types of existing basin.
• Reduce energy consumption with maximum transport efficiency
at low air flow rate High oxygen transfer rate
can be maintained continuously
• Operates during all seasons, even during severe conditions of plant
with high oxygen transfer rate.
• Low power consumption, durable.
• Triangulary arranged cone shape minimizes bubble coalescene
Bubbling occurs evenly over each cross-section
with a wide range of airflow.


♧ Application
• Wastewater treatment plant
• Sewage treatment plant
• Aeration tank,
• Livestock wastewater treatment plant
• Filtration plants


♧ Properties
• Size : D = 327mm
• Dispersive Formation : Cross-section / Entire circular body
• Material : ABS Copolymer , Nylon Connector : 20A (Socket)
• Air flow rates : 60~130L/min


♧ Customer
• PT. HYUNDAI INTI DEVELOPMENT / CIKARANG
• PT. SAMA INDAH / BANDUNG
• PT. MEWAH NIAGA JAYA / BANDUNG
• PT. SINAR PANGJAYA MULIA / BANDUNG
• PT. JERDYTEX / BANDUNG
• PT. ORIENTAL EMBROIDERY / BANDUNG
• PT. KEMARGA KURNIA TEXTILE INDUSTRY / BANDUNG
• PT. HARAPAN TEXTILE INDONESIA / BANDUNG
• PT. TAK INDONESIA